 |
1210
kit
10M-2M Transverter kit |
Specifications
Transmit Receive
Ideal new use for those idle 10
meter mobile rigs. Full 10 watts RF output. ALC-controlled 10M input
handles power range of 4 to 20 watts. Solid-state T-R switching.
Engineered from scratch for optimised 10M-2M conversion performance.
Compact: 1.5"H x 5 "W x 8"D.
Model 1210 Specifications:
- Frequency Coverage: 144-148 MHz
band, typically 144-145.7 MHz, based on 28-29.7 MHz tuning range of
most 10 meter transceivers. 116 MHz local oscillator.
- Power requirement:
12-14VDC, 100 mA. receive, 600 mA in transmit with no drive, 2.0A on
transmit at 10 watts output.
- Construction:
Black texture painted clamshell-type steel top and bottom, aluminium
panel chassis and heatsink. One 5.5 "X 3.75" double-sided
circuit board.
- Semiconductors: 2 IC's, 13
transistors, 25 diodes. RF final. BLW81.
Top
TRANSMIT:
- RF Output: 10
watts maximum an CW and FM, 10 watts PEP on SSB.
- T/R Switching: solid state, RF
sensing.
- Output Power Adjustment
Range: 2 to 10 watts.
- Spurs and Harmonics: Greater
than -56 dBc at 10 watts out.
- Standard TX Hang Time:
Approximately 1 second.
- Input Drive: Less than 0.5
watts input to key TX mode. 4 watts input for 10 watts output. Input
drive level is ALC controlled between 4 and 20 watts. Input SWR less
than 1.5:1.
Top
RECEIVE:
- Noise figure: less than 7 dB.
- Conversion Gain: Approximately
17 dB.
- Image Rejection: Greater than
60 dB.
- Input Intercept: -6.5 dBm
typical.
Top
[TOP]
[TenTec UK home page]
[Price list] [Payment / order information]
[KIT
INDEX PAGE]
© 2006 TenTec, trade marks acknowledged
E&OE
Page last updated 23 June 2006
