AR2800 bulletin page

AOR (UK) Ltd

Unit 9, Dimple Road Business Centre, Matlock, Derbyshire DE4 3JX, England
Tel: +44 (0) 1629 581222 Fax: +44 (0) 1629 580070

AR2800 Bulletin Page

The AR2800 receiver is no-longer serviced. Parts are not available from the manufacturer and service costs equal or exceed the resale value.

Microprocessor reset (Acrobat PDF file 92kB)

Unlocking Search & scan banks

Unlocking Search and Scan Banks

In cases were the set does not appear to operate correctly, first try these few ideas... it usually is simply "finger" trouble.

SCAN
1) Memory banks which contain no data will not be scanned, this sometimes happens when channels have been deleted by the customer (or following a microprocessor reset). Enter data into at least one channel of each bank and try scan again.

i.e. MANUAL 1 3 3 . 7 ENTER

PROG 000 PROG 100 PROG 200 PROG 300etc

2) Ensure that ALL banks are listed for scan. To reinstate all memory banks SCAN BANK PROG 0 LIMIT 9 ENTER

SEARCH
1) Ensure that all banks are listed for search. To reinstate all search banks SEARCH BANK PROG 0 LIMIT 9 ENTER

2) Ensure that data is correctly stored in the search parameters

SEARCH PROG 150 LIMIT 160 ENTER 25 ENTER FM ENTER "X" ENTER SEARCH
Where "X" is the bank which you wish to reprogram (i.e. 1,2,3, etc).

3) Check that the first frequency of a search bank is not locked out, this is how the receiver of a search bank is not locked out, this is how the receiver decides whether the search bank is locked out.

SEARCH BANK PROG LOCKOUT

The first locked out frequency will appear on the display, to release it press LOCKOUT or to move on to the next press ENTER

Hunt for the first frequency of each search bank to ensure that they are not locked out release them by pressing LOCKOUT

Alternatively simply unlock every frequency in the lockout list - but this may take some time as there could be as many as 1000.

When the last frequency is unlocked the receiver will start searching. Don't go too quickly or you may start LOCKING OUT new frequencies rather that UNLOCKING old ones... this may be the case if all the frequencies suddenly appear numeric!! If so just start point 3 again.

Top

Due to continuous developments, AOR reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviation from these values in individual units.

Send mail to webmaster@aoruk.com with questions or comments about this web site only.
HOME PAGE PRICES